1. Offset Morticing 2. Aluminium Doors 3. Long Drill Kit 4. Small Bore Kit
5. Quick Change Precision Cutters - Wood Cutters - Aluminium Cutters 6. Spare Parts
1. Offset Morticing
Our offset morticing slide attachment is available as a complete kit, or as an upgrade for the standard morticer. This attachment was developed for European-style rebated doors with off-centre mortices.
Using the same vertical bar and clamp system, the attachment has a sliding drive shaft housing, so that mortices can be cut off-centre.
This flexible attachment allows the cutting of hinge recesses, and the mortice for the strike plate, on door frames of less than 95mm thick.
back to top
2. Aluminium Doors
With specially designed cutters, aluminium doors present no problems for the robust DBB Morticer. We offer four cutter sizes to provide what you need to cut a lock-slot in an aluminium door.
N.B.You must always use the appropriate safety equipment when cutting metals.
back to top
3. Long Drill Kit
The long Drill Kit has been specifically designed for the easy installation of electric lock cables through wooden doors - from lock to hinge.
After cutting the lock mortice, the long drill adapter converts a standard morticer into a guide frame for the long drill system.
Special geometry helps keep the cutter 'on line' with minimal effort.
Our Long Drill Kit is a leader in its field because it is quick, accurate and easy to use.
| Description of Kit/Part |
Order Ref. |
Long Drill Adapter
|
DBB/LD/A |
| 10mm x 950mm long, wood drill 10950 |
10950 |
| 10mm x 1250mm long, wood drill 101250 |
101250 |
back to top
4. Small Bore Kit
The small bore kit has a housing which readily replaces the standard one and quickly allows the morticing for smaller locks.
| Description of Kit/Part |
Order Ref. |
Housing Kit (incl. spanners)
|
DBB/SB/HK |
| Shaft only |
DBB/SBS |
| Wood cutter 13.2mm |
WB13 |
| Wood cutter 14.6mm |
WB15 |
5. Quick Change Precision Cutters
Our unique cutter design means that they can be changed and fitted in seconds, whilst the jig is in position on the door.
The specifically designed cutting edges are chisel shaped to cut deep without clogging, with a standard shaft, to a depth of 90-100mm
Carbide Tipped Wood Cutters
| Description of Part |
Order Ref. |
5/8" (16.2mm)
|
CWB16 |
| 1/16" (17.5mm) |
CWB18 |
| 3/4" (19.0mm) |
CWB19 |
| (20.0mm) |
CWB20 |
| 13/16" (20.6mm) |
CWB21 |
| 7/8" (22.2mm) |
CWB22 |
| (23.0mm) |
CWB23 |
| 5/16" (23.8mm) |
CWB24 |
| 1" (25.4mm) |
CWB25 |
| 1 1/16" (27.0mm) |
CWB27 |
| 1 1/8" (28.6mm) |
CWB29 |
| 1 1/4" (31.8mm) |
CWB32 |
back to top
Aluminium Cutters
| Description of Part |
Order Ref. |
5/8" (16.2mm)
|
NAB16 |
| 3/4" (19.0mm) |
NAB19 |
| 1" (25.4mm) |
NAB25 |
| 1 1/4" (31.8mm) |
NAB32 |
back to top
Plunging Cutters
| Description of Part |
Order Ref. |
17.6mm
|
PD18 |
| 23.0mm |
PD23 |
| 25.4mm |
PD25 |
| 29.0mm |
PD29 |
back to top
6. Spare Parts
Any part of the DBB Morticer can be replaced individually.
We can also supply special kits for non-standard locks and applications.
| Description of Part |
Order Ref. |
Offset Housing Kit
|
DBB/HK/O |
| Housing Kit c/w fixings (doors up to 55mm) |
DBB/HK |
| Housing Kit c/w fixings (doors 55mm +) |
DBB/HK/S |
| Standard Shaft (locks up to 100mm deep) |
JIG/SS |
| Long Shaft (locks up to 180mm deep) |
JIG/LS |
| Six (6) Set Screws & Allen Key |
DBB/GS |
| Plastic Carrying Case |
DBB/CC |
| Canvas Carry Bag |
DBB/CB |
back to top
|
