Our offset morticing slide attachment is available as a complete kit, or as an upgrade for the standard morticer. This attachment was developed for European-style over-rebated doors with off-centre mortices.
Using the same vertical bar and clamp system, the attachment has a sliding drive shaft housing, so that mortices can be cut off-centre.
This flexible attachment allows the cutting of hinge recesses, and the mortice for the strike plate, on door frames of less than 95mm thick.
With specially designed cutters, aluminium doors present no problems for the robust DBB Morticer. We offer five cutter sizes to provide what you need to cut a lock-slot in an aluminium door.
N.B.You must always use the appropriate safety equipment when cutting metals.
The long Drill Kit has been specifically designed for the easy installation of electric lock cables through wooden doors – from lock to hinge.
After cutting the lock mortice, the long drill adapter converts a standard morticer into a guide frame for the long drill system.
Special geometry helps keep the cutter ‘on line’ with minimal effort.
Our Long Drill Kit is a leader in its field because it is quick, accurate and easy to use.
The small bore kit has a housing which readily replaces the standard one and quickly allows the morticing for smaller locks.
Our unique cutter design means that they can be changed whilst the jig is in position on the door.
The specifically designed cutting edges are chisel shaped to cut deep without clogging, with a standard shaft, to a depth of 100mm (Longer Shafts shown under Spare Parts below).
Carbide Tipped Wood Cutters
Aluminium Cutters
Plunging Cutters
Any part of the DBB Morticer can be replaced individually.
We can also supply special kits for non-standard locks and applications.
